Suzuki Liana RH413 Service Manual page 576

5A-28 Automatic Transmission/Transaxle:
Scan Tool Data Definitions:
GEAR POSITION
Current gear position computed by throttle position
coming from ECM and vehicle speed.
ENGINE SPEED (RPM)
Engine speed computed by reference pulses from
crankshaft position sensor.
INPUT SHAFT REV (RPM)
Input shaft revolution computed by reference pulses
coming from input shaft speed sensor on transaxle case.
OUTPUT SHAFT REV (RPM)
Output shaft revolution computed by reference pulses
coming from output shaft speed sensor / VSS on
transaxle case.
BATTERY VOLT. (V)
Battery voltage read by TCM as analog input signal by
TCM.
ATF TEMP. (°C, °F)
ATF temperature decided by signal from transmission
fluid temperature sensor installed in valve body.
SHIFT SOL #1 COM
ON: ON command being outputted to shift solenoid
valve-A / No.1
OFF: ON command not being outputted to shift solenoid
valve-A / No.1
SHIFT SOL #1 MON
ON: Electricity being passed to shift solenoid valve-A /
No.1
OFF: Electricity not being passed to shift solenoid valve-
A / No.1
SHIFT SOL #2 COM
ON: ON command being outputted to shift solenoid
valve-B / No.2
OFF: ON command not being outputted to shift solenoid
valve-B / No.2
SHIFT SOL #2 MON
ON: Electricity being passed to shift solenoid valve-B /
No.2
OFF: Electricity not being passed to shift solenoid valve-
B / No.2
SHIFT TIMING SOL COM
ON: ON command being outputted to timing solenoid
valve
OFF: ON command not being outputted to timing
solenoid valve
SHIFT TIMING SOL MON
ON: Electricity being passed to timing solenoid valve
OFF: Electricity not being passed to timing solenoid
valve
TCC SOLENOID COM
ON: ON command being outputted to TCC solenoid
valve
OFF: ON command not being outputted to TCC shift
solenoid valve
TCC SOLENOID MON
ON: Electricity being passed to TCC solenoid valve
OFF: Electricity not being passed to TCC solenoid valve
PRESS CONT SOL (%)
Electric current value ratio between electric current value
being outputted from TCM to solenoid and maximum
value can be outputted by TCM.
VEHICLE SPEED (KPH/MPH)
Vehicle speed computed by reference pulses coming
from vehicle speed sensor on transaxle case.
O/D OFF SWITCH (MON)
Inputted signal from O/D off switch on selector knob.
ON: O/D off switch ON
OFF: O/D off switch OFF
TRANS. RANGE
Transaxle range detected by signal fed from
transmission range sensor.
D RANGE SIGNAL
ON: Signal which TCM require ECM to increase idle
speed
OFF: Signal which TCM does not require ECM to
increase idle speed
THROTTLE POSITION (%)
Throttle opening ratio computed by duty signal from
ECM.
BRAKE SWITCH
Inputted signal from brake light switch on pedal bracket.
ON: Brake pedal depressed
OFF: Brake pedal released
TORQ REDUCTION SIG
ON: Signal which TCM require ECM to reduce output
torque at shifting gear
OFF: Signal which TCM does not require ECM to reduce
output torque
COOLANT TEMP. (°C, °F)
Engine coolant temperature computed by duty signal
from ECM.