9F-1 Security and Locks:
Security and Locks
Body, Cab and Accessories
Key Coding Construction
Key Usage and Identification
Key is used for ignition and door lock cylinder. Keys are cut on both edges to make them reversible.
Key identification is obtained from five character key code stamped on key code tag. Using this key code, key code
cutting combination can be determined from a code list (available to owners of key cutting equipment from suppliers).
If key codes are not available from records or tags, key code can be obtained from the right hand door lock cylinder (if
lock has not been replaced). Lock cylinders supplied by the factory as service parts are unmarked.
If original key is available, key code cutting combination can be determined by laying key.
Power Door Lock and Keyless Entry System (If Equipped) Component Location
1. Power door lock controller
2. Transmitter
General Description
Component Location
3. Power door lock switch
4. Front door actuator
5. Rear door actuator
6. Rearend door actuator (for wagon model)
S3RH0A9601001
S3RH0A9603001
I3RH0A960001-01
7. Door switch