Suzuki Liana RH413 Service Manual page 417

5) Drive mountings out with special tools and hydraulic
press (1).
Special tool
(C): 09951-16080
(D): 09951-26020
Installation
1) Press mountings (1) in rear mounting bracket (2) by
using special tools and hydraulic press (3) with
caring its installation position shown in the figure.
Special tool
(C): 09951-16080
(D): 09951-26020
1
(C)
(D)
I3RH01322010-01
I3RH0A320003-01
2) Install differential rear mounting (4), and tighten
mounting bracket bolts (5) and mounting bolts (6) to
specified torque.
Tightening torque
Differential rear mounting bracket bolt (a): 50
N·m (5.0 kgf-m, 36.5 lb-ft)
Differential rear mounting bolt (b): 80 N·m (8.0
kgf-m, 58.0 lb-ft)
6, (b)
5, (a)
3) Install stabilizer bar bracket (1) and tighten stabilizer
bar mount bolt (2) to specified torque.
Tightening torque
Stabilizer bar mount bolt (a): 23 N·m (2.3 kgf-m,
17.0 lb-ft)
Differential: 3B-4
6, (b)
4
I3RH01322012-01
2, (a)
1
I3RH01322013-01