Rear Door Glass Removal And Installation - Suzuki Liana RH413 Service Manual

9E-11 Glass / Windows / Mirrors:
1. Door glass
2. Window regulator assembly
: Apply lithium grease 99000-25010 to
sliding part.
3. Glass run
4. Door trim
5. Door sealing cover

Rear Door Glass Removal and Installation

Removal
1) Remove inside handle bezel (1).
2) Remove inside door grip cover (2), and then remove
door trim mounting bolts (3).
1
3) Detach door trim mounting clips.
4) Remove door trim (1).
With inside handle bezel (2) tilted toward inside, turn
and remove door trim as shown.
And disconnect power window switch lead wire at
coupler.
1
6. Inner sash
7. Door panel
8. Door glass mounting screw
: Tighten front screw first, and then tighten
rear screw.
9. Rear door outer weather-strip
10. Rear door outer weather-strip mounting
screw.
S3RH0A9506008
2
3
I2RH01950028-01
2
I4RH01950010-01
11. Door grip cover
12. Rear door window regulator mounting bolt
: Tightening referring to "Rear Door Window
Regulator Removal and Installation".
a, b: Sash upper mounting screw
: Tightening order: c → b → a
c: Sash lower mounting bolt
: Tightening order: c → b → a
: Tightening torque
5) Remove door sealing cover (1).
1
6) Remove outer weather-strip (1). Do not deform it
when removal.
1
7) Loosen door glass mounting screws (1), and then
drop door glass (2) from window regulator (3).
8) Detach rear part of glass run from sash (4), and
remove sash by removing 2 screws (5) and bolt (6).
9) Remove door glass (2).
5
6
I2RH01950030-01
2
I2RH01950031-01
4
2
1
3
I4RH01950011-01