Rearend Door Window / Back Window Defogger
Wire Repair
1) Use white gasoline for cleaning.
2) Apply masking tape (1) at both upper and lower
sides of heat wire (2) to be repaired.
3) Apply commercially-available repair agent (3) with a
fine-tip brush (4).
4) 2 to 3 minutes later, remove masking tapes (1).
Power Window Main Switch Inspection
Check for continuity between terminals at each switch position. If check result is not as specified, replace switch.
S3RH0A9506018
5) Leave repaired heat wire as it is for at least 24 hours
before operating the defogger again.
Glass / Windows / Mirrors:
S3RH0A9506019
9E-18
I2RH01950005-01
I3RH0A950003-01