2.11 Ethernet Communication
2.11.1
Ethernet setting
The Ethernet setting, which has been configured with GT Designer3, can be checked.
The host station setting, network number, station number, and IP address are changeable.
For the Ethernet setting, refer to the following.
➠
GOT2000 Series Connection Manual for the controller used
2.11.2
Display operation of the Ethernet setting
GOT basic setting
Touch
[Ethernet].
If the Ethernet setting is changed with applicable GOT special registers (GS), the GOT may not operate with the new
Ethernet setting displayed in the utility.
Therefore, restart the GOT to reflect the new setting.
Ethernet setting
2.11 Ethernet Communication
2
2 - 67