Artkn: Assignment Of Route Trunk Data For Ndm - NEC NEAX 7400 IMX Command Manual

ARTKN: Assignment of Route Trunk Data for NDM

1. General
As the function of ALRTN and ATRK commands are combined into this command, it is used to allocate both
the Logical Route Number and the Trunk number (TK) at the same time. The data assigned by this command is
written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the NDM at each Lo-
cal Node (LN).
2. Precautions
1. This command can be used only logging in to NCN.
2. When the Logical Route data is deleted by this command, ATRK data of FPC designated Node is also
deleted. When you want to delete the allocated Logical Route data only, use ALRTN command.
3. To delete the ATRK data is failed, only the deletion of allocated Logical Route is activated.
4. This command is available since Release 7 software enhancement.
3. Data Entry Instructions
LGRT is the unique number allocated to each
external trunk route in the Fusion network.
LOGICAL
ROUTE
NUMBER
(LGRT)
FPC
Assign FPC of each node to
which the external trunk
route belongs.
LGRT
FUSION ROUTE
POINT CODE NUMBER
(FPC) (RT)
1-253
Assign all external routes
in the Fusion network.
The TN parameter is appended when the external
trunk route number is entered in RT parameter.
TRUNK LINE EQUIPMENT NUMBER
NUMBER (LENS)
(TK)
MG U
RT
Enter unique trunk number
with a range from 1 to 255.
ND-70348 (E)
TN
TENANT
NUMBER
(TN)
G LV
TK
ARTKN
CHAPTER 4
Page 462
Revision 3.0