Asid: Assignment Of Special Incoming - NEC NEAX 7400 IMX Command Manual

ASID: Assignment of Special Incoming

1. General
This command is used to assign the call destination of the following service features;
Off Hook Alarm
Attendant Night Transfer
Priority Call
Do not Disturb
Room Cut Off
2. Precautions
1. The applicable stations to achieve the above service feature are categorized as named "Special Group". The
stations belonging to the Special Group is assigned by the ASGD command.
2. The applicable tenant number (TN) range is designated by the ASYD command, SYS 1, INDEX 8. If data
of this command is common for all tenants (ASYD command, SYS1, INDEX 94, bit7=1), assign TN pa-
rameter as data "1" for all tenants.
3. Do not enter the S/A = A (Attendant Console), when F =3 (Attendant Night Transfer) is entered.
4. The GN parameter should correspond to the one assigned by the ASGD command.
3. Data Entry Instructions
0 = Off Hook Alarm
1 = Do Not Disturb (for Hotel System)
2 = Room Cut Off (for Hotel System)
3 = Attendant Night Transfer
4 = Priority Call 1
5 = Priority Call 2
6 = Priority Call 3
7 = Not used
TENANT
NUMBER
(TN)
Enter GN assigned by the ASGD command
F
FUNCTION GROUP
NUMBER NUMBER
(F) (GN)
0-7 1-7
GN
S/A
S = Station
A = Attendant
SPECIFIC TERMINATING EQUIPMENT
STATION/
SPECIAL STATION
ATTCON
NUMBER
(S/A) S/A
(SSTN)
S
A
SSTN
Enter the destination station/Attendant Console number
ND-70348 (E)
ASID
REMARKS
CHAPTER 4
Page 554
Revision 3.0