Auidn: Assignment Of User Id Data For Ndm - NEC NEAX 7400 IMX Command Manual

Table of Contents

Advertisement

AUIDN: Assignment of User ID data for NDM

1. General
This command is used to assign the User ID data such as user name and password for the purpose of logging in
to PBX by the MAT. Also, a remote LN is allowed to access to the NCN via the User ID data programmed in
AUIDN. Once programming the User ID data, User ID data entry is necessary to login from the next time.
2. Precautions
1.
Prior to this command, NDM block is assigned at SYS1, INDEX 514 in ASYDL
2.
ASCII code is available for "User Name".
3.
In case the login information is assigned in NDM data, the data is valid in the whole Netfusing network.
Data assignment/deletion is activated only in the NCN (Network Control Node).
4.
In Netfusing Network system, User ID in both LDM and NDM data is available. When the same User ID
duplicates in LDM and NDM, only the login information in the NDM data is to be effective.
5.
When assigning login information to NDM data, all the User ID in the NCN and LNs is to be checked. If
the specified User ID duplicates to the existing one, error message is indicated. If you want to use this User
ID in NDM data, it must be deleted from LDM data beforehand.
6.
A maximum of 2,047 User ID data can be assigned in NDM data per a Netfusing Network. In case login
information for both LDM and NDM is assigned by AUIDL and AUIDN command, maximum 2174 User
ID data (127 User IDs in LDM + 2047 User IDs in NDM) can be assigned per a Node.
3. Data Entry Instructions
USER NAME
Assign the user name via
16 bytes ASCII codes
USER NAME
MAX. 16 DIGITS
Note:
The parameter "Grade" is valid since Release 11 software enhancement. The ALGDN command deter-
mines the usable commands depending on each User Grade. If the grade data is not assigned, the User ID
can use all the commands when logging in.
GRADE
Designate the User Grade for each
Note
User ID.
PASSWORD
MAX. 8 DIGITS
PASSWORD
Enter the password two times for sure in the MAT display.
The assigned password is displayed as "
ND-70348 (E)
(page 202)
YEAR, MONTH, DAY
Enter the date when assigned the data
GRADE
YEAR
MONTH
1-16
" on the MAT.
AUIDN
.
DAY
CHAPTER 4
Page 228
Revision 5.0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents