NEC NEAX 7400 IMX Command Manual page 248

When SRV=OGC (Outgoing call) is assigned;
When SRV=OGCA (Outgoing call with route advance) is assigned;
Index counter (Count)
Count
Assign the number of advanced trunk Route.
When SRV=LCR (Least cost routing) is assigned;
When SRV=LCRS (Register sender LCR) is assigned;
LOGICAL ROUTE SECOND DIAL TONE
NUMBER (RT)
LGRT
Assign a dummy route number.
2nd DT
Second dial tone sending (which is sent when a station has
dialed the digits specified in NND of the ANPDL command)
0=Second DT is not sent
1=Second DT is sent
LOGICAL ROUTE NUMBER
INDEX is the route advance order.
AUTHORIZATION CODE
(2nd DT) 0/1
Authorization code after dialing
ACC(LCR)+Destination number
0=Out of Service
1=In Service
ND-70348 (E)
(LGRT)
INDEX LOGICAL ROUTE NUMBER (LGRT)
1
2
3
INDEX
SUB ADDRESS DIALING
(AH) 0/1
AH
ISDN-Sub Address Dialing
0=Out of Service
1=In Service
ASPAL
(SUB) 0/1
SUB
CHAPTER 4
Page 243
Revision 3.0