NEC NEAX 7400 IMX Command Manual page 394

4. Data Sheet
User Group Number (UGN)
CDN
Telephone Number (TELN) Max. 16 digits
DTR (ER) Control (0/1)
1 DTR
0=Check
Auto Answer (0/1)
2 AUTO 0=Manual Answer
1=Auto Answer
Outgoing MODEM Number (0-8)
3 MDM1 0=No MODEM
1-8=MODEM Number
Incoming MODEM Number (0-8)
4 MDM2 0=No MODEM
1-8=MODEM Number
Bit Speed Rate (0-31)
0=50 bps.
2=110 bps.
4=200 bps.
5 SPD 6=600 bps.
8=2400 bps.
10=9600 bps.
12=48.0 Kbps.
14=64 Kbps.
Parity Addition (0/1)
6 PRTY
0=No Parity
Asynchronous (0/1)
7 ASYC
0=Asynchronous 1=Synchronous
Half/Full Duplex (0/1)
8 HDX
0=Full Duplex
Stop Bit (0/1)
9 STOP
0=1 bit
Application Code (0-15)
0=No Character
1=ASCII (7-bit) Even Parity
2=ASCII (7-bit) Odd Parity
3=ASCII (7-bit) Parity is "0"
10 CODE 4=ASCII (7-bit) Parity is "1"
5=JIS (7-bit) Even Parity
6=JIS (7-bit) Odd Parity
7=JIS (8-bit)
9=IA #5 (7-bit) 10=ITA #2 (5-bit)
11=EBCD
The existing data can be readout by pressing "Get" button after UGN and TELN is entered.
Note:
1=No Check
1=75 bps.
3=150 bps.
5=300 bps.
7=1200 bps.
9=4800 bps.
11=19.2 Kbps.
13=56.0 Kbps.
15-31=Not used
1=Parity
1=Half Duplex
1=2 bit
8=EBCDIC (8-bit)
12-15=Not used
ND-70348 (E)
ADA2_T
CHAPTER 4
Page 387
Revision 3.0