When “Kind=Iptrk (Fccs)” Is Selected - NEC NEAX 7400 IMX Command Manual

c.) When "KIND=IPTRK (FCCS)" is selected:
LENS
Enter the Line Equipment Number of IPTRK card. The
existing data can be read out by pressing the "Get" button.
KIND
Select "IPTRK (FCCS)".
LINE
EQUIPMENT
KIND OF
NUMBER
SELECTION
(LENS)
(KIND)
MG U G
IPTRK
(FCCS)
ARP
Select the Frame type of ARP, when
"Detail" check box is checked.
IEEE
DIX (standard setting)
NETWORK FRAME CLIENT/SERVER
ID TYPE OF CONNECTION
(NETID) ARP MAX. NUMBER
0-15 (ARP) (CSLINK_NUM)
DG_IP
Enter the IP address of the router.
IP ADDRESS
IP ADDRESS
OF DEFAULT
OF IPTRK
GATEWAY
(IPTRKIP)
(DG_IP)
CSLINK_NUM
Select the maximum number of
client/server connections.
4 line
24 line
64 line
192 line
PKTLOSS JIT_MAX JIT_MIN MNGS
Check the "RTP" check box for detail assignment. (Usually default data "0" is set for all the parameters.)
PKGLOSS: Amount of Packet Loss [0%-100%]
Maximum Jitter Buffer [0-60 × 10ms]
JIT_MAX:
Minimum Jitter Buffer [0-60 × 10ms]
JIT_MIN:
MNGS: Interval of Jitter adjustment [0-255 times]
JIT_COUNT: Interval of Jitter statistics [0-255 second]
BASE_COUNT: Interval of Time-base correction [0-255 second]
JIT_FAST: Judging rate of fast arrived packet [0-100%]
TIME_FAST: Time-base correction Judgment [0-100%]
ND-70348 (E)
ToS CONTROL
Select the either,
IP Precedence/DiffServ
NET MASK
OF IP
CONTROL
ADDRESS
(NETMSK)
8 line 16 line
32 line 48 line
96 line 128 line
255 line
RTP
RTP
QoS 1/2
0-7: When IP Precedence is selected.
0x00-0x3F: When DiffServ is selected.
QoS DATA
FOR SIGNAL FOR SPEECH
ToS
ROUTE
(QoS 1)
0-7/0x00-0x3F 0-7/0x00-0x3F
JIT_ BASE_
JIT_FAST
COUNT COUNT
0=8% (default)
0=600ms (default)
0=80ms (default)
0=5 times (default)
0=1 second (default)
0=10 second (default)
0=100% (default)
0=50% (default)
AGIP
QoS DATA
PATH
(QoS 2)
TIME_
FAST
CHAPTER 4
Page 641
Revision 4.0