Acoc: Assignment Of Central Office Code - NEC NEAX 7400 IMX Command Manual

ACOC: Assignment of Central Office Code
1. General
This command is used to assign C.O. line code and tie line code corresponding to particular trunks.
2. Precautions
1. The Central Office Code (COC) assigned by this command is displayed on ATTCON and also D
stead of the trunk number.
2. The COC assigned by this command is used to specify a trunk by the Individual Trunk Access service
feature.
3. This command affects the trunk route assigned the R/L = 1 by the ARTD command.
4. The Listed Directory Number (LDN) can be assigned as COC, and is convenient to identify the trunk.
3. Data Entry Instructions
ROUTE NUMBER
(RT)
Enter 4 digits of COC
TRUNK NUMBER
(TK)
ND-70348 (E)
DC
DIGIT CODE
(DC)
ACOC
term
in-
REMARKS
CHAPTER 4
Page 471
Revision 3.0