Asgdl: Assignment Of Special Group Data For Ldm - NEC NEAX 7400 IMX Command Manual

ASGDL : Assignment of Special Group Data for LDM
1. General
This command is used to assign the stations which belong to the special group applied to the following service
features:
Off Hook Alarm
Priority Call
The member stations are specified by Telephone Number previously assigned by the ALGSL command. This
data is written in the Local Data Memory (LDM).
2. Precautions
1. The call destination of the special group is designated by the ASIDL command.
2. Since the GN parameter is intermediate data to the ASIDL command, enter a unique number for each spe-
cial group.
3. This command is available since Release 11 software enhancement.
3. Data Entry Instructions
TELN
Enter the Telephone Number
of the station which belongs to
the special group.
USER
TELEPHONE NUMBER
GROUP
NUMBER
(UGN)
0=Off Hook Alarm
1=Not used
2=Not used
3=Not used
(TELN)
Max. 16 digits
F
FUNCTION
NUMBER NUMBER
(F)
0-7
GN
Enter a unique Group Number for
each special group.
ND-70348 (E)
4=Priority Call 1
5=Priority Call 2
6=Priority Call 3
7=Not used
GROUP
REMARKS
(GN)
1-255
ASGDL
CHAPTER 4
Page 553
Revision 5.0