NEC NEAX 7400 IMX Command Manual page 547

3. Data Entry Instructions
UGN and TELN (UCD pilot station number) parameters should be assigned with respect to the data assigned by the ASHUN
command.
USER
GROUP
NUMBER
(UGN)
Enter the maximum number of calls in the
UCD queuing.
(When the number of incoming call exceeds
this value, the caller hears Busy Tone.)
UGN and TELN
QTH ACT
UCD queuing value is:
0 = Invalid (QTH parameter is not assigned)
1 = Valid (QTH parameter is assigned)
TELEPHONE
PEG COUNT
NUMBER
(TELN)
(QTH ACT) 0/1
QTH
ND-70348 (E)
The call record to the UCD group
is transferred to MCI
0 = Valid
UCD UCD
QUEUING QUEUING
PEG COUNT
VALUE VALUE
(QTH ) 0-255
Enter the number of calls in the UCD queue.
(This value is used for UCD Call Waiting Lamp on D
MCI
1 = Invalid
THRESHOLD
MCI DATA
VALUE OF
TRANSFER
CALL WAITING
(MCI)
(CWT)
0/1
1-255
CWT
term
AUCDN
)
CHAPTER 4
Page 530
Revision 3.0