Asidn: Assignment Of Special Incoming For Ndm - NEC NEAX 7400 IMX Command Manual

ASIDN : Assignment of Special Incoming for NDM
1. General
This command is used to assign the call destination of the following service features in Netfusing;
Off Hook Alarm
Attendant Night Transfer
Priority Call
The destination stations are to be specified by using Telephone Number previously assigned by the ALGSN
command. The data assigned by this command is written in the Network Data Memory (NDM) of the Network
Control Node (NDM), upgrading the NDM at each Local Node (LN).
2. Precautions
1. The applicable stations to achieve the above service features are categorized as Special Group. The sta-
tions which belong to the Special Group are assigned by the ASGDN command.
2. The GN parameter should correspond to the one assigned by the ASGDN command.
3. This command is available since Release 11 software enhancement.
3. Data Entry Instructions
F
0=Off Hook Alarm
1=Not used
2=Not used
3=Attendant Night Transfer
4=Priority Call 1
5=Priority Call 2
6=Priority Call 3
7=Not used
FUNCTION
USER
NUMBER
GROUP
NUMBER
(UGN)
1
Enter the Group Number assigned
by the ASGDN command.
SPECIFIC
TERMINATING
GROUP
(F) NUMBER
0-7 (GN)
1-255
GN
S/A
S: Telephone Number (of the station)
A: Attendant Console
SPECIFIC TERMINATING EQUIPMENT
SPECIAL TELEPHONE NUMBER
S/A
S
A
S
ND-70348 (E)
(STELN)
Max. 16 digits
STELN
Enter the Telephone Number of the
destination station. (When S/A=S is
selected.)
ASIDN
REMARKS
CHAPTER 4
Page 555-1
Revision 5.0