Ashpl: Assignment Of Station Hunting Group-Pilot For Ldm - NEC NEAX 7400 IMX Command Manual

ASHPL: Assignment of Station Hunting Group-Pilot for LDM

1. General
This command is used to assign the data related to the Station Hunting - Pilot. With this command, Station Hunt-
ing Group - Pilot can be assigned by using Telephone Number.
2. Precautions
1. This command is also used to modify and delete the Station Hunting - Pilot service feature related data.
2. The maximum number of member stations within a Hunting Group is 100, not including the Secretary
Station. It cannot be executed to assign a station belongs to other Station Hunting Group in duplicate.
3. The Pilot station number is assigned in the TELN parameter.
4. There is no limitation on the number of Pilot groups in a system.
5. The data assigned at this command is invalid in Netfusing system.
6. This command is available since Release 7 software enhancement.
3. Data Entry Instructions
UGN
Fixed to 1.
USER GROUP
NUMBER (UGN)
1
NUMBER
OF
STATIONS
(CNT)
2
3
4
5
Enter the Telephone Number to be assigned in "EDIT TELN" box on the display.
Note:
TELEPHONE NUMBER
(TELN)
Max. 16 digits
STATION NUMBER (STN)
TELN NUMBER
OF
STATIONS
(CNT)
27
28
29
30
TELN CNT 2-100
Telephone Number of the member stations.
SECRETARY TELN
Enter the secretary telephone number
if required.
SECRETARY TELEPHONE
NUMBER (SECRETARY TELN)
Max. 16 digits
TELN NUMBER
OF
STATIONS
(CNT)
52
53
54
55
ND-70348 (E)
TELN NUMBER
OF
STATIONS
(CNT)
77
78
79
80
ASHPL
TELN
CHAPTER 4
Page 513
Revision 3.0