Auogl: Assignment Of Ucd Overflow Group For Ldm - NEC NEAX 7400 IMX Command Manual

AUOGL: Assignment of UCD Overflow Group for LDM
1. General
This command assigns the data related to the Overflow - UCD service feature for each Node by using Telephone
Number. The data is written in Local Data Memory (LDM).
2. Precautions
1. The UCD member station and the UCD pilot (controlling station) station should be assigned by the
ASHUL command.
2. The calls terminate to the designated group can overflow (forward) to another UCD group. They overflow
from UGN-A, TELN-A to UGN-B, TELN-B.
3. This command is available since Release 9 software enhancement.
3. Data Entry Instructions
UGN-A and TELN-A (UCD pilot station number) parameters should be
assigned with respect to the data assigned by the ASHUL command.
ORIGINAL UCD GROUP
USER
GROUP
NUMBER
(UGN-A)
UGN-A and TELN-A
TELEPHONE
NUMBER
(TELN-A)
UGN-B and TELN-B (UCD pilot station number) parameters should be assigned
with respect to the data assigned by the ASHUL command.
ND-70348 (E)
OVERFLOW UCD GROUP
USER
GROUP
NUMBER
(UGN-B)
UGN-B and TELN-B
AUOGL
TELEPHONE
NUMBER
(TELN-B)
CHAPTER 4
Page 532
Revision 3.0