NEC NEAX 7400 IMX Command Manual page 218

SYSTEM
SYSTEM
DATA
DATA
INDEX
TYPE
(INDEX)
(SYS)
512-1535
865
866
867~895
896
1
897
898~927
928
929
Assign the same FPC to INDEX 865 and INDEX 866.
Note:
BIT
DATA
CORRESPONDING
(DATA)
DATA
00 – FF
DATA
(Hex)
BIT
0/1
b ~b
0
b
0
0 b ~b
1
b
4
0 b ~b
5
b ~b
0
b ~b
4
ND-70348 (E)
SYSTEM DATA CONTENTS
FPC (Fusion Point Code) of the node providing IP
(Assign 0 when the ACD service is activated in the self node
only.)
FPC: 1-253 (01 Hex – FD Hex)
Note: This data is necessary at all nodes.
Assign the self FPC at the node providing ACDP.
FPC (Fusion Point Code) of the node providing ACDP
(Assign 0 when the OAI service is activated in the self node
only.)
FPC: 1-253 (01 Hex – FD Hex)
This data is necessary at all nodes.
Note 1:
Assign the self FPC at the node providing ACDP.
Note 2: When OAI and ACD functions are used together
in a Netfusing network, enter the same FPC value
in INDEXes 865 and 866.
Not used
FPC (Fusion Point Code) of the node providing PMS
7
PMS Interface
0/1 = RS-232C/LAN
Not used
3
ACK/NAK control while text sending/receiving in PMS LAN
connection
0 = ACK/NAK control is invalid
1 = ACK/NAK control is valid
Note: Available for the software Release 10 or later.
Not used
7
Not used
(For 16-IMG system)
Fixed to "0".
TSW card accommodation on ISWM in 16-IMG system
0/1 = Not accommodated/Accommodated
3
b0: TSW0 b2: TSW2
b1: TSW1 b3: TSW3
Not used
7
ASYDL
CHAPTER 4
Page 215
Revision 4.0