Acfol: Assignment Of Call Forwarding Data For Ldm - NEC NEAX 7400 IMX Command Manual

ACFOL : Assignment of Call Forwarding Data for LDM
1. General
This command is used to assign various call forwarding service data. The destinations of forwarded calls can
be the attendant console, a station, or an outside party. The destination station is to be designated by the Tele-
phone Number previously assigned by the ALGSL command. This data is written in the Local Data Memory
(LDM) of each node.
2. Precautions
1. The parameter ADC is required only when "Night Connection Outside" is selected in "CF" parameter.
The Abbreviated Digit Codes (ADC) and the speed dial number are assigned by the ASPD command.
2. This command is available since Release 11 software enhancement.
3. Data Entry Instructions
Select the type of call forwarding service.
1 = Call Forwarding – Busy Line
2 = Call Forwarding – Don't Answer
3 = Call Forwarding – Intercept
4 = Night Connection Outside
USER
GROUP FORWARDING
NUMBER
(UGN)
CFI
ATT: Forwarded to Attendant Console
TELN: Forwarded to Station
CF
CALL FORWARDING DESTINATION
CALL
SERVICE
CFI
(CF)
Enter the ADC to the forwarded destination
when " CF = Night Connection Outside " is
selected.
TELEPHONE NUMBER
(TELN)
Max. 16 digits
Enter the Telephone Number of destination station to
which the call is to be forwarded. This parameter
appears when " TELN " is selected in " CFI " parameter.
ND-70348 (E)
ADC
ABBREVIATE
DIGIT CODE
(ADC)
Max. 4 digits
TELN
CHAPTER 4
Revision 5.0
ACFOL
Page 594