Arrcn: Assignment Of Alternative Route Restriction For Ndm - NEC NEAX 7400 IMX Command Manual

ARRCN: Assignment of Alternative Route Restriction for NDM

1. General
This command is used to accomplish trunk tandem connection (Logical route to Logical route via the Netfusing
Network). This data is written in the NDM of the NCN.
2. Precautions
1. The ASTD command is also required to access trunk tandem connections including C.O. Line.
2. When data "2 (Toll Restriction is required)" is assigned at the ARI-D_RES parameter, the ATDPN com-
mand designates the connection allowed area (office) code.
3. The following table shows the applicable data assignment of ARI-A_RES and ARI-D_RES parameter.
ARI-A_RES
0
1
1
1
0
0
3. Data Entry Instructions
ARI-A_RES
Tandem connection with an operator/station
assistance
0 = Restricted
INCOMING LOGICAL
ROUTE NUMBER
(ICLGRT)
1-899
Tandem connection
ARI-D_RES
with operator assistance
0 Restricted
0
1
2
1
2
1 = Allowed
OUTGOING LOGICAL
ROUTE NUMBER
(OGLGRT)
1-899
Allowed
Allowed
Depend on ATDPN/AARPN as-
Allowed
This data assignment is not applicable.
Tandem connection without an operator/station
assistance
0 = Restricted
2 = Toll (Conditional) restriction is required
ARI-A_RES ARI-D_RES
0/1
ND-70348 (E)
Tandem connection
without operator assistance
Restricted
Restricted
Allowed
signment
ARI-D_RES
1 = Allowed
REMARKS
0-2
ARRCN
CHAPTER 4
Page 297
Revision 3.0