NEC NEAX 7400 IMX Command Manual page 420

FUNCTION
TCL Trunk Class
Specify the kind of trunk
1= DDD Line
3= WATS Line
4= Tie Line/Announcement Trunk
6
5= CCSA
7= CAS Line
9= Code Call Trunk
11= General Paging Trunk
12= Radio Paging Trunk
L/T Line/Trunk Identification
7
0= Not used (Line) 1= Trunk
RLP Trunk Release Pattern
0= Calling Party Release (Outgoing only)
8 1= Not used
2= First Party Release (either station or trunk side)
3= Not used
TQ Outgoing Trunk Queuing
9
0= Out of Service 1= In Service
SMDR Detailed Billing Information
10 0= SMDR Out of Service
1= SMDR In Service (ORT required for receiving all dialed digits)
11 TD Toll Denial Battery Reversal
DR Distinctive Ringing Pattern
This parameter designates whether distinctive ringing will be provid-
ed for an incoming call.
12 0=Distinctive Ringing is not required
(ASYD, SYS 3, Index 3, Bit 0=0)
1=Distinctive Ringing is required
(ASYD, SYS 3, Index 3, Bit 0=1)
LGRT
1-899
2= FX
6= Toll Terminal
8= Paging
10= Dictation Trunk
13-31= Not used
ND-70348 (E)
REMARKS
1 1 1 1 This data should always be
assigned as "1"
Normally assign data "2".
0 0 0 0 Always assign data "0".
ARTDN
CHAPTER 4
Page 413
Revision 3.0