Auog: Assignment Of Ucd Overflow Group - NEC NEAX 7400 IMX Command Manual

AUOG: Assignment of UCD Overflow Group
1. General
This command is used to assign the data related to the Overflow - UCD service feature.
2. Precautions
1. The UCD member station and UCD pilot (controlling station) station should be assigned by the ASHU
command.
2. The calls terminate to the designated group can overflow (forward) to another UCD group. They overflow
from TN-A, STN-A to TN-B, STN-B.
3. The applicable tenant number (TN) range is designated by the ASYD command, SYS 1, INDEX 8.
3. Data Entry Instructions
TN-A and STN-A (UCD pilot station number) parameters should be assigned
with respecting to the data assigned by the ASHU command.
ORIGINAL UCD GROUP
TENANT
NUMBER
(TN-A)
TN-B and STN-B (UCD pilot station number) parameters should be assigned
with respecting to the data assigned by the ASHU command.
TN-A and STN-A
OVERFLOW UCD GROUP
TENANT
STATION
NUMBER
NUMBER
(TN-B)
(STN-A)
TN-B and STN-B
STATION
NUMBER
(STN-B)
ND-70348 (E)
AUOG
REMARKS
CHAPTER 4
Page 531
Revision 3.0