NEC NEAX 7400 IMX Command Manual page 513

4. Data Sheet
CDN
TRUNK DATA
1 RST Assignment of Restart
0 = Restart Send per Individual Channel
1 = Not used
3 = Restart not Send
2 HMT When assigning this data, zero (0) should al-
ways be entered.
3 TRCRST Call Restriction by Information transfer rate in
Bearer Capability Information Element
0 = No restriction
1 = Data call restriction (Unrestricted digital,
Restricted digital and Video data calls are
restricted.)
2 = Speech call restriction (Speech, 3.1 kHz
audio and 7 kHz audio calls are restricted.)
3-15 = Not used
4 TRSRST Call Restriction by Information transfer rate in
Bearer Capability Information Element
0 = No restriction
1 = 384 Kbps (H0) call is restricted
2 = 1536 Kbps (H11)/1920 Kbps (H12) call is
restricted.
3 = 384 Kbps and 1536 (H11)/1920 Kbps
(H12) calls are restricted.
4-15 = Not used
5 T309LNK Assignment of Timer T309 for Data Link Fail-
ure
0 = Layer 2 Alarm with T309 for Data Link
Failure
1 = Layer 2 Alarm [Temporary] with T309 is
enabled
2 = Layer 2 Alarm [Permanent] with T309 is
enabled
3 = Not used
6 T309CON Assignment of Timer T309 for Layer 1 Failure
0 = Layer 1 Alarm with T309 is disabled
1 = Layer 1 Alarm [Temporary] with T309 is
enabled
2 = Layer 1 Alarm [Permanent] with T309 is
enabled
3 = Not used
ROUTE NUMBER
2 = Not used
0
ND-70348 (E)
0 0
CHAPTER 4
Revision 3.0
ARTI
0
Page 499