NEC NEAX 7400 IMX Command Manual page 304

3. Data Entry Instructions
♦ Tandem Switching
TDM/OG
T = Tandem Connection
O = Outgoing Connection
DAY/NIGHT
TANDEM/
MODE
OUTGOING
(DAY/NIGHT)
CONNECTION
(TDM/OG)
T
♦ Outgoing Connection
TDM/OG
T = Tandem Connection
O = Outgoing Connection
DAY/NIGHT
TANDEM/
MODE
OUTGOING
(DAY/NIGHT)
CONNECTION
(TDM/OG)
O
Refer to the ARSC command.
DAY/NIGHT
D = Day Mode
N = Night Mode
INCOMING OUTGOING
ROUTE ROUTE
NUMBER NUMBER
(ICRT) (OGRT)
When assigning DC, the digits including
the access code must be assigned.
DAY/NIGHT
D = Day Mode
N = Night Mode
RESTRICTION OUTGOING
CLASS ROUTE
(RSC) NUMBER
0-15 (OGRT)
ND-70348 (E)
TDI
Restriction Data
0 = Connection is Restricted
1 = Connection is Allowed
2 = 3/6 Digit Toll Restriction
3 = C.O. Operator Call (9+0)
DESTINATION (AREA) CODE
(DC)
MAX. 11 DIGITS
TDI
0 = Connection is Restricted
1 = Connection is Allowed
2 = 3/6 Digit Toll Restriction
3 = C.O. Operator Call (9+0)
DESTINATION (AREA) CODE
(DC)
MAX. 11 DIGITS
When assigning DC, the digits including
the access code must be assigned.
NND
This parameter is
available only when
TDI=2
RESTRICTION NECESSARY
DATA DIGIT
(TDI) (NND)
0-3 1-12
NND
This parameter is
available only when
TDI=2
RESTRICTION NECESSARY
DATA DIGIT
(TDI) (NND)
0-3 1-12
CHAPTER 4
Page 299
Revision 3.0
ATDP