NEC NEAX 7400 IMX Command Manual page 525

CDN
TRUNK DATA
34 NPI Numbering Plan Identification
0 = Unknown
1 = ISDN/Telephony Numbering Plan
2 = Not used
3 = Data Numbering Plan
4 = Telex Numbering Plan
5-7 = Not used
8 = National Standard Numbering Plan
9 = Private Numbering Plan
10-14 = Not used
15 = Reserved for Extension
Others = Not used
Note:
35 L/T Local/Toll (Russia only)
When assigning this data, zero (0)
should always be entered.
Event Based CCIS (E-CCIS)
36 ECCIS
0/1 = Invalid/Valid
Release timer for E-CCIS Line
37 ECCISTM
0 : 3 minutes (Default)
1 : 15 seconds
2 : 30 seconds
3 : 1 minute
4 : 2 minutes
5 : 5 minutes
6 : 10 minutes
7 : 15 minutes
8 : 30 minutes
9 : 1 hour
10-13 : Not used
14 : Immediately after call completion
15 : Not released
OG Billing for E-CCIS Line
38 ECCISOB
0/1 = Not required/Required
39 ECCISIB IC Billing for E-CCIS Line
0/1 = Not required/Required
40 SPMET Account Pulse Watch Control
Not used
41 IDRT ID Code Specification
Not used
42 ECCISTD Addressing Information used in
E-CCIS
0 = Called DID number
1 = Called Sub Address
Note 1:
This data is valid for the software Release 2 or later.
LOGICAL ROUTE NUMBER (1-899)
This data is effective when
ARTD, INT = 4 and SRV
bit7 = 1 is assigned.
(for Speech Channel)/1 minute (for
Single Channel)
0
Note 1
Note 1
Note 1
Note 1
ND-70348 (E)
0 0
CHAPTER 4
Revision 3.0
ARTIN
0
Page 510