Alrnn: Assignment Of Logical Route And Route Class Data For Ndm - NEC NEAX 7400 IMX Command Manual

ALRNN: Assignment of Logical Route and Route Class Data for NDM

1. General
As the function of ALRTN, ARTD and ARTDN commands are combined into this command, it can be used to
allocate the Logical Route number and to assign/delete Route Class data at the same time. The data assigned by
this command is written in Network Data Memory (NDM) of the Network Control Node (NCN), updating the
NDM at each Local Node (LN).
2. Precautions
1. This command can be used only when logging in to NCN.
2. When Route Class Data is assigned at FPC designated node, the data is also assigned to NDM.
3. In case of data deletion by this command, Route Class Data of both NDM and FPC designated node are
deleted.
As the DM data set by ARTD command is also deleted in this process, when you want to delete the allo-
cated Logical Route Number only, use ALRTN command.
4. This command is available since Release 7 software enhancement.
3. Data Entry Instructions
See Data Sheet on the following pages.
ND-70348 (E)
ALRNN
CHAPTER 4
Page 431
Revision 3.0