Adsl: Assignment Of Dterm Soft Key On Lcd Data - NEC NEAX 7400 IMX Command Manual

ADSL: Assignment of D
1. General
This command is used to create an additional soft key pattern (for D
2. Precautions
1. Four soft keys appear on a D
four different functions, and a station user may turn the soft key pages over by simply pressing the page
scroll key (which may be indicated ">>>").
2. The soft key allows different functions to be assigned depending on the call status of the D
3. This command creates the maximum of 16 customized key patterns.
Available for the software release 5 or later. 15 patterns at the maximum (SKP=0 is not used) for the earlier
Note:
released than the above-mentioned software.
4. SKN (Soft key number) is the guide number to assign the function data (FKY) onto each soft key of all the
pages. SKN within a soft key pattern (SKP) is illustrated in Figure 4-12.
11:20
MIC
SN = 0 (Idle)
PAGE 0
SKN 0
PAGE 1
SKN 4
PAGE 2
SKN 8
PAGE 3 SKN 12
SN = 6 (Trunk busy, BT connection)
PAGE 0 SKN 0
PAGE 1 SKN 4
PAGE 2 SKN 8
SKN 12
PAGE 3
Note 1: Available only for the Station to which Busy Service is applied.
Note 2: Available for software Release 9 or later.
term
Soft Key on LCD Data
term
75, and those soft keys have four pages. This allows each soft key to have
Figure 4-12 Soft Key Pattern
AM WED 16
DND
SKN 1 SKN 2
SKN 5 SKN 6
SKN 9 SKN 10
SKN 13 SKN 14
•
•
•
SKN 1 SKN 2
SKN 5 SKN 6
SKN 9 SKN 10
SKN 13 SKN 14
term
23456789
APR 1997
>>>
SOFTWARE KEY PATTERN
SN= 0
(Idle)
SN= 1
SKN 3
(Originating, DT connection)
SKN 7
SN= 2
(Originating, RBT connection)
SKN 11
SN= 3
(Called station busy, BT connection)
SKN 15
SN= 4
(Communication in progress)
SN= 5
(Consultation Hold, Controlling Station)
SN= 6
(Trunk busy, BT connection)
SN= 7
Not used
SKN 3
SN= 8
(Consultation Hold when Called
SKN 7
Station is Busy - Controlling Station)
SN= 9
SKN 11
(3-party Conference call)
SN=15
SKN 15
(Others)
ND-70348 (E)
75).
term
(SKP)
Note 1
Note 1
Note 2
Note 2
ADSL
75 station.
CHAPTER 4
Page 360
Revision 3.0