Sip Trunk Route Settings - NEC Univerge SV9300 Programming Manual

Issue 1.0
3.6
14

SIP Trunk Route Settings

All values shown are for example purposes only. Your actual values will be
determined by your implementation team.
Figure 9 CM 35 SIP Trunk Route Settings
1. Select the Trunk Route Number assigned to voice channels and click
the Read button to get current data settings.
2. YYY=000 Select 00 for SIP trunk service.
3. YYY=004 Select 2 for SIP trunk service.
4. YYY=009 Select 03 for SIP trunk service.
5. Click Apply.
Command Line Example:
CM 35000>01>00
CM 35004>01>2
CM 35009>01>03
(SIP Trunk Route Data: Provide SIP Service)
(SIP Trunk Route Data: Provide SIP Service)
(SIP Trunk Route Data: Provide SIP Service)
SIP Trunk Programming Guide
Spectrum Enterprise