Agcl: Assignment Of Guest Station Class - NEC NEAX 7400 IMX Command Manual

AGCL: Assignment of Guest Station Class

1. General
This command is used to change the data assigned to a Guest Station: Telephone Equipment Class (TEC), Ser-
vice Feature Class (SFC), Route Restriction Class (RSC), ROOM CLASS and Floor Service Data [Annex
(ANX), Ground/Underground (G), Floor (FLR)].
2. Precautions
1. This command is used for the Hotel Application only.
2. Only Telephone Equipment Classes (TECs) 5-8, 10 and 12 may be assigned via this command.
3. Floor Service Data is displayed only in the case of the ASYD command, SYS1, INDEX 165, b7=1 (Floor
Service is provided).
4. When you have changed the station class, update the data sheet for the AGST command.
ND-70348 (E)
AGCL
CHAPTER 4
Page 796
Revision 3.0