Catk Continuous Assignment Of Trunk Data - NEC Univerge SV8500 Operation And Maintenance Manual

CATK: Continuous Assignment of Trunk Data
1. Functional Outline
This command can assign/delete many trunk data with consecutive numbers at once.
2. Parameters
Type/KIND:
When ASSIGN is selected in the TYPE/KIND selection list box
Input Data
RT:
TK (START):
TK (END):
STEP:
LENS (START): First Line Equipment Number [six digits]
LENS (END):
TN:
RSC:
SFC:
GROUP (START):First Group Number [0-31]
GROUP (END): Last Group Number [0-31]
LEVEL (START): First Level Number [0-7]
LEVEL (END):
TYPE:
Assign/Delete
Route Number
First Trunk Number [1-768]
Last Trunk Number [1-768]
Trunk Count-up Step [1-10]
Last Line Equipment Number [six digits]
Tenant Number
Route Restriction Class [0-15]
Service Feature Class [0-15]
Last Level Number [0-7]
Count-up Type [1-6]
Note 3
1 = LEVEL GROUP
2 = LEVEL UNIT
3 = GROUP UNIT
4 = GROUP LEVEL
CHAPTER 7
Note 1
Note 2
Note 2
UNIT
GROUP
LEVEL
UNIT
– 722 –
Maintenance Commands