ARPC: Assignment of Remote Point Code for Centralized Service
1. General
This command is used to assign the data related to the Message Center Interface - CCIS service feature.
2. Precautions
1.
This command is used only at the main office of the Message Center Interface - CCIS service feature.
2.
The MCI is installed at the main office of the CCIS network, and the MCI text is transmitted (or received)
to (from) the external VMS when an event treated by the MCI service feature has occurred at the satellite
office.
3. Data Entry Instructions
1 = Message Center
2-7 = Not used
CENTRALIZED SERVICE NUMBER
(CSN)
1-7
1
CSN
REMOTE POINT CODE COUNTER
(CNT)
1-32
1
2
3
ND-70348 (E)
RPC
Enter the PC of the satellite office.
REMOTE POINT CODE
(RPC)
1-16383
ARPC
REMARKS
CHAPTER 4
Page 599
Revision 3.0