Tcp/Ip Connection; Modifying Or Adding A Pbx Alias - NEC NEAX 7400 IMX Command Manual

6.2 TCP/IP Connection

This section explains how to add or modify a PBX Alias in IMX MAT when it is connected to a PBX using a TCP/
IP connection through a Local Area Network (LAN).
Procedure Overview
1. Modify or add a PBX Alias.
2. Assign the network information in Windows.
3. Start the PBX system.
4. Log in to IMX MAT.
5. Assign the system data.
6. Set up the IMX MAT file operations for logging purposes.
Note: If your IMX is to reside on your existing LAN, you will need to obtain an available IP address from your
System Administrator before you configure the PBX Alias.

6.2.1 Modifying or Adding a PBX Alias

The following steps explain how to create a PBX Alias in IMX MAT.
1. From the PBX menu, select Configuration to open the PBX Administration dialog box.
2. Enter a name for the PBX Alias in the PBX Alias box.
Note: You can also define a PBX Alias by selecting the default NEXT-PBX or by modifying any other previously
defined Alias from the list in the PBX Alias box. If you select a PBX Alias from the list, its related informa-
tion displays in the additional fields on this dialog box. You can enter information in the Connect Timeout,
Response Timeout, Pacing Timer, and Link Data Log Path fields if necessary.
3. Select TCP/IP as the Connection Type.
4. Enter the appropriate FPC (Fusion Link Point Code). 1 is the default value and should be used initially for all
new IMX systems. In a Netfusing Network, this setting must follow the FPC value entered into System Data
SYS 1 INDEX 512.
5. Enter 120000 in the Connection Timeout text box.
6. Enter 120000 in the Response Timeout text box.
7. Enter 10000 in the Pacing Timer text box.
ND-70348 (E)
HOW TO OPERATE MAT
CHAPTER 2
Page 35
Revision 3.0