Ahls: Assignment Of Hot Line Station - NEC NEAX 7400 IMX Command Manual

AHLS: Assignment of Hot Line Station

1. General
This command is used to assign the data related to the Hot Line service feature.
2. Precautions
1. Prior to assigning this command, the Hot Line station should be given the TEC=14 (Hot Line class) by the
ASDT/AAST command. Additionally, TEC=13 (Data Terminal via D
pearance) can also be able to apply the Hot Line service.
2. If you want to delete the station which applied Hot Line service, delete the Hot Line data by this command
prior to deleting the station number by the ASDT/AAST command.
3. When the Hot Line destination is the outside party, assign the Abbreviation Digit Code (ADC) of the speed
calling number by the ASPD command.
3. Data Entry Instructions
TYPE
1=Station
2=Outside party(ADC)
3=Trunk Line
HOTLINE HOTLINE
TENANT STATION
NUMBER NUMBER
(HOT TN) (STN)
HOT TN
Enter the tenant number of the
Hot Line station.
CON TN / STN
Enter CON TN / STN data when
TYPE=1.
CONNECTION DESTINATION
TYPE STATION'S
(TYPE) TENANT
1-3 NUMBER
(CON TN)
Enter ADC when TYPE=2 (Outside party).
The ADC should be assigned by the ASPD command.
ND-70348 (E)
term
Enter CON RT / TK data when
TYPE=3 (Trunk Line).
DESTINATION SPEED
STATION NUMBER CALLING
(STN) CODE (ADC)
MAX. 4
DIGITS
ADC
) and TEC=18 (Virtual Line Ap-
CON RT / TK
OPPOSITE TRUNK
PARTY'S NUMBER
ROUTE (TK)
NUMBER
(CON RT)
CHAPTER 4
Page 379
Revision 3.0
AHLS