Cpbkn Continuous Assignment Of System Phone Book For Ndm - NEC Univerge SV8500 Operation And Maintenance Manual

CPBKN:Continuous Assignment of System Phone Book for NDM
1. Functional Outline
This command is used to assign/delete System Phone Book data in a lump (Batch Assignment) by drawing up
text format database file. The data assigned by this command is written in the Network Data Memory (NDM)
of the Network Control Node (NCN), updating the NDM at each Local Node (LN).
2. Parameters
Input Data
Input the following data to text format database file. For the details of database file, refer to
for Batch Assignment".
INDEX:
RESULT:
TN:
UGN:
NAME:
CNT:
DC_01 - DC_20: Digit Code 01 - Digit Code 20 [Maximum 32 digits (0-9, #, *)]
Buttons
Read File:
Execute:
Exit:
Index of Row [Number/Character string]
This field is not registered to the system. Input the index of row in the database. Do not
leave a blank in this field.
Result of File Check or Data Assignment/Deletion
Result of file check or data assignment/deletion is displayed. No data input is required
in this field.
Tenant Number [1-63]
Input Tenant Number. Do not leave a blank in this field.
User Group Number [1-255]
Input User Group Number. Do not leave a blank in this field.
Name [Maximum 24 characters]
Input the name to register to System Phone book. Do not leave a blank in this field. Do
not leave a blank space at the end of name.
Count of DC [0-20]
Input the number of DC to register to System Phone book. Do not leave a blank
in this field.
Input the DC (dial number) to register to System Phone book.
Read out the information.
Make the input data valid.
Exit this command.
CHAPTER 7
– 758 –
Maintenance Commands
"Database File