Acic2: Assignment Of Cic Code Data 2 - NEC NEAX 7400 IMX Command Manual

ACIC2: Assignment of CIC Code Data 2

1. General
This command is used for CCIS data programming, and is assigned the Circuit Identification Code (CIC) and
LENS (of the speech channel of the CCIS link) for the PC.
2. Precautions
1. A unique CIC number should be given for each speech channel (which is assigned by the ATRK command)
of the CCIS link.
2. The CIC number assigned by this command must correspond to the one assigned in the direct facing node
in the CCIS network.
3. The ACIC2 command is not required for ISDN interface.
3. Data Entry Instructions
PC
Destination Point Code assigned
by the ADPC/ACIC1 command.
DETERMINATE POINT
CODE(PC)
1-16383
1
Assign unique CIC for all speech channel.
CIRCUIT
IDENTIFICATION
CODE
(CIC) 1-999
1 0
LENS
Assign LENS of speech channel
ND-70348 (E)
CIC
LINE EQUIPMENT
NUMBER
(LENS)
0 0 0 2 0
ACIC2
REMARKS
CHAPTER 4
Page 497
Revision 3.0