Arrc: Assignment Of Alternative Route Restriction - NEC NEAX 7400 IMX Command Manual

ARRC: Assignment of Alternative Route Restriction

1. General
This command is used to accomplish trunk tandem connection.
2. Precautions
1. The ASTD command is also required to access trunk tandem connections including C.O. Line.
2. When data "2 (Toll Restriction is required)" is assigned at the ARI-D_RES parameter, the ATDP command
designates the connection allowed area (office) code.
3. The following table shows the applicable data assignment of ARI-A_RES and ARI-D_RES parameter.
ARI-A_RES
0
1
1
1
0
0
3. Data Entry Instructions
ARI-A_RES
Tandem connection with an operator/station
assistance
0 = Restricted
INCOMING
ROUTE NUMBER
(ICRT)
1-255
Tandem connection
ARI-D_RES
with operator assistance
0 Restricted
0
1
2
1
2
1 = Allowed
OUTGOING
ROUTE NUMBER
(OGRT)
1-255
Allowed
Allowed
Depend on ATDP/AARP assign-
Allowed
This data assignment is not applicable.
Tandem connection without an operator/station
assistance
0 = Restricted
2 = Toll (Conditional) restriction is required
ARI-A_RES ARI-D_RES
0/1
ND-70348 (E)
Tandem connection
without operator assistance
Restricted
Restricted
Allowed
ment
ARI-D_RES
1 = Allowed
REMARKS
0-2
ARRC
CHAPTER 4
Page 296
Revision 3.0