Afch: Assignment Of Fcch Number For Ldm - NEC NEAX 7400 IMX Command Manual

AFCH: Assignment of FCCH Number for LDM

1. General
This command is used to assign the FCCH card which provides the D-channel in the Netfusing link.
2. Precautions
1. Before executing this command, the trunk for D-channel should be assigned by the ACRD/ACTK com-
mands.
2. Use sequential numbers starting from 1 at each node.
3. Assign odd numbers for Group and 0 (zero) for Level in the parameter FCHEN.
4. For more detailed information, see the "Netfusing System Manual".
When IPTRK is used in FCCS over IP feature, assign even numbers for Group in the parameter FCHEN
Note:
(since Release 10 software enhancement).
3. Data Entry Instructions
FCHN
The unique number allocated to
the FCH card at each node.
FCCH NUMBER (FCHN)
1-255
1
2
3
Note:
FCCH can use Expanded LENS (Group 24 - 31) as well as Physical LENS.
FCHEN
LENS of the FCH card.
LENS OF FCCH (FCHEN)
MG U
0 2
0 0
0
2
0 0
0
0 3
0
ND-70348 (E)
L
G
7
0
9
0
1
0
AFCH
Note
REMARKS
CHAPTER 4
Page 632
Revision 4.0