Isdn-Pri Programming; Digital Trunk Data Assignment - NEC Neax 2000 IVS2 Manual

ISDN-PRI PROGRAMMING

Digital Trunk Data Assignment

START
Assign an AP number to the DTI/PRT
CM05
card.
The AP number must match the SENSE
switch setting on the DTI/PRT card.
Specify the AP highway channel for 24DTI/
PRT card.
Assign trunk numbers to each channel
CM07
number on the DTI/PRT card.
The system allocates time slots to
consecutive channels from lowest to
highest channel number assigned. To
minimize the number of time slots
allocated, assign trunk numbers to the
consecutive channels on each card.
Never skip channels in CM07.
Allow second Dial Tone when dialing
CM48
access code assigned by CM20 for ISDN
B channel route.
A
2
NEAX2000 IVS ISDN System Manual
ND-70919 (E), Issue 1.0
DESCRIPTION
INITIAL
INITIAL
INITIAL
CHAPTER 3 SYSTEM DATA PROGRAMMING
Y=0
•
(1) 04-15, 20-31: AP No.
(2) 09: DTI card
12: PRT card
Y=1
•
(1) 04-15, 20-31: AP No.
(2) 0 : Expanded Highway channel
(128 time slots)
1 : Basic Highway channel
(128 time slots)
YY=01
•
(1) XX ZZ
XX: 04-15, 20-31: AP No. assigned by
ZZ: 00-23: Channel No. of 24DTI/PRT
01-15, 17-31: Channel No. of
(2) D000-D255: Trunk No.
Any trunk No. already assigned by
CM10 cannot be used.
Y=2
•
(1) 04
(2) 0 : For ISDN trunk route, 2
is provided.
nd
1 : No 2 Dial Tone
ISDN-PRI Programming
DATA
CM05
30DTI
nd
Dial Tone
Page 65