Asydn: Assignment Of System Data For Ndm - NEC NEAX 7400 IMX Command Manual

ASYDN: Assignment of System Data for NDM

1. General
This command is used to specify the system data for the Netfusing Network.
2. Precautions
1. The data assigned by this command determines the service condition which affects the other nodes in the
Netfusing Network.
2. Data for ASYDN assigned at NCN (Network Control Node) has priority over data for ASYDL assigned
LN (Local Node) in the Netfusing Network.
3. The ASYDN command consists of SYS1, INDEX 0 - 1535.
4. For more details, see the "Netfusing System Manual".
ND-70348 (E)
ASYDN
CHAPTER 4
Page 653
Revision 3.0