4.
Click Next on the Choose Destination Location dialog box to install the IMX MAT software in the default
directory.
Note:
If you wish to install the software in another directory, you can click Browse to display a dialog box that allows you
to select or create another directory.
5.
The dialog box, as shown in the figure below (information on WINSOCK setup), appears. Click OK.
Figure 2-7 Choose Location Destination Screen
Figure 2-8 Winsock 2 Setup Message Dialog Box
ND-70348 (E)
HOW TO OPERATE MAT
CHAPTER 2
Page 28
Revision 3.0