Aasn: Assignment Of Alternated Administration Station Number - NEC NEAX 7400 IMX Command Manual

AASN: Assignment of Alternated Administration Station Number

1. General
This command is used to change a currently assigned Administration Station Number.
2. Precautions
1. This command is used for the Hotel Application only.
2. Input a number which is not currently assigned. If a station number currently being used is to be assigned
as a new number, delete the station first via the AAST command.
3. When the "PKG CHECK" message is displayed during assignment, confirm the LENS location of the cir-
cuit card (PA-16LC, etc.) accommodating the station, then press the ENTRY key.
4. When you have changed the station number, update the data sheet for the AAST command.
ND-70348 (E)
AASN
CHAPTER 4
Page 790
Revision 3.0