Acpgl: Assignment Of Call Pickup Group For Ldm - NEC NEAX 7400 IMX Command Manual

ACPGL: Assignment of Call Pickup Group for LDM

1. General
This command is used to assign the data related to Call Pickup Group - LDM service. With this command, Call
Pickup Group service feature can be assigned by using Telephone Number.
2. Precautions
1. The maximum number of member stations within each Call Pickup Group is 100.
2. The access code of the Call Pickup Group is assigned by the ASPAL command SSC, SID=7.
3. There is no limitation on the number of Call Pickup Group within a system.
4. One station can be assigned to the member of only one Call Pickup Group.
5. Either Call Pickup Group for LDM or Call Pickup Group for NDM can be executed in a system . (Both
services can't coexist in a system.)
6. The data assigned at this command is invalid in Netfusing system.
7. This command is available since Release 7 software enhancement.
3. Data Entry Instructions
UGN
Fixed to 1.
USER GROUP NUMBER
(UGN)
1
NUMBER
TELEPHONE
OF
NUMBER
STATIONS
(TELN)
(CNT)
2
3
Note: Enter the Telephone Number to be assigned in "EDIT TELN" box on the display.
TELEPHONE NUMBER
(TELN)
Max.16 digits
NUMBER
TELEPHONE
OF
NUMBER
STATIONS
(TELN)
(CNT)
27
28
ND-70348 (E)
TELN
Assign a Telephone Number of the member station.
NUMBER
TELEPHONE
OF
NUMBER
STATIONS
(TELN)
(CNT)
52
53
ACPGL
NUMBER
TELEPHONE
OF
NUMBER
STATIONS
(TELN)
(CNT)
77
78
CHAPTER 4
Page 541
Revision 3.0