Asidl: Assignment Of Special Incoming For Ldm - NEC NEAX 7400 IMX Command Manual

ASIDL : Assignment of Special Incoming for LDM
1. General
This command is used to assign the call destination of the following service features;
Off Hook Alarm
Attendant Night Transfer
Priority Call
Do Not Disturb
Room Cut Off
The destination stations are to be specified by using Telephone Number previously assigned by the ALGSL
command. This data is written in the Local Data Memory (LDM).
2. Precautions
1. The applicable stations to achieve the above service features are categorized as Special Group. The sta-
tions which belong to the Special Group are assigned by the ASGDL command.
2. The GN parameter should correspond to the one assigned by the ASGDL command.
3. This command is available since Release 11 software enhancement.
3. Data Entry Instructions
F
0=Off Hook Alarm
1=Not used
2=Not used
3=Attendant Night Transfer
4=Priority Call 1
5=Priority Call 2
6=Priority Call 3
7=Not used
USER FUNCTION
GROUP NUMBER
NUMBER
(UGN)
1
Enter the Group Number assigned
by the ASGDL command.
SPECIFIC
TERMINATING
GROUP
(F) NUMBER
0-7 (GN)
1-255
GN
S/A
S: Telephone Number (of the station)
A: Attendant Console
SPECIFIC TERMINATING EQUIPMENT
SPECIAL TELEPHONE NUMBER
S/A
S
A
S
ND-70348 (E)
(STELN)
Max. 16 digits
STELN
Enter the Telephone Number of the
destination station. (When S/A=S is
selected.)
ASIDL
REMARKS
CHAPTER 4
Page 555
Revision 5.0