NEC NEAX 7400 IMX Command Manual page 439

4. Data Sheet
LOGICAL ROUTE (LGRT) 1-899
FUSION POINT CODE (FPC) 1-253
ROUTE NUMBER (RT) 1-255
Signal Interface for Outgoing
0 = CCIS No.7
2 = Second Dial Tone
1 OSGS 4 = Sender (Immediate Start)
5 = Not used
6 = Sender (Delay Dial Start)
7 = Sender (Wink start)
Signal Selection for Outgoing
0 = Not used
2 = PB, 60msec. Interruption or CCIS No.7
3 = DP/PB
5 = DP, 20 pps, 33% Make
2 ONSG
6 = Not used
7 = DP, 20 pps, 50% Make
8 = PB, 120 msec. Interruption
9 = DP, 10 pps, 40% Make
10 = MFC
Signal Interface for Incoming
0 = CCIS No.7
2 = Second Dial Tone
3 ISGS 4 = Sender (Immediate Start)
5 = Not used
6 = Sender (Delay Dial Start)
7 = Sender (Wink Start)
Signal Selection for Incoming
0 = Not used 1= DP, 10 pps, 33% Make
2 = PB, 60msec. Interruption or CCIS No.7
3 = DP/PB
5 = DP, 20 pps, 33% Make
4 INSG
6 = Not used
7 = DP, 20 pps, 50% Make
8 = PB, 120 msec. Interruption
9 = DP, 10 pps, 40% Make
10 = MFC
Type of Trunk Function
0 = Not used
5 TF 1 = Outgoing Trunk (OGT)
2 = Incoming Trunk (ICT)
3 = Bothway Trunk (BWT)
1 = RingDown
3 = Not used
Note
8-15= Not used
1 = DP, 10 pps, 33% Make
4 = MF
11-15=Not used
1 = Ring Down
3 = Not used
Note
8-15= Not used
4 = MF
11-15=Not used
ND-70348 (E)
ALRNN
REMARKS
Note:
The select
signal in
ONSG should
be "DP."
Note: The select
signal in
INSG should
be "DP."
CHAPTER 4
Page 432
Revision 3.0