Atdf: Assignment Of Time Difference Data - NEC NEAX 7400 IMX Command Manual

ATDF: Assignment of Time Difference Data

1. General
This command is required when there is time difference within the Netfusing link. The difference of time be-
tween nodes and the UCT (Universal Coordinated Time) are written in Network Data Memory (NDM) of the
Network Control Node (NCN) by using this command.
2. Precautions
1. When "SIGN" = 0, "HOUR" and "MINUTE" are not available. Therefore, if SIGN = 0, the data will be
deleted.
2. For more detail, see the "Netfusing System Manual" .
3. Data Entry Instructions
FPC
Enter FPC which has Time difference
FUSION POINT
CODE
(FPC) 1-253
10
11
HOUR OF
SIGN OF
DIFERRENCE DIFERRENCE TIME
TIME DATA (HOUR)
(SIGN) 0-2 00-12
1 1 0
0
SIGN
0=No Data
1=Plus (+)
2=Minus (-)
HOUR
Enter the digits ranged from 0-12.
MINUTE OF
DIFERRENCE TIME
DATA (MINUTE)
00-59
6 0
6 3
MINUTE
Enter the digits ranged from 0-59.
ND-70348 (E)
REMARKS
0
0
ATDF
CHAPTER 4
Page 687
Revision 3.0