Eqp Parameter - NEC NEAX 7400 IMX Command Manual

DATA
0 Dead Level Number
1 Unused Number
2 Remote Access to PBX
3 May be used for other purposes
4 Outgoing Trunk Busy Announcement
5-14 May be used for other purposes
15 Alert Service (for Hotel system)
16 Timed Reminder Set Message (for Business system)/
Service Set-up Message (for Hotel system)
17 Service Set-up Failure Message (for Hotel system)
18 Timed Reminder Cancel Message (for Business
system)/Service Cancel Message (for Hotel Message)
19 Service Cancel Failure Message (for Hotel system)
20 Room Cut-Off Announcement (for Hotel system)
21 Do Not Disturb Announcement (for Hotel system)
22 Timed Reminder/Wake up Call Message for
Announcement Trunk
23-31 Group Announcement (for Hotel system)
32 Delay Announcement-Attendant
(for U.S.A/Canada only)
Note:
EQP3 and 5-14 can be used for SRV=ANNC.
When SRV=ANNCM (Announcement service-Multiple announcement) is assigned;
TENANT NUMBER
(TN) 1-63
TN
Assign the tenant number of
the announcement trunk.
Table 4-6 EQP parameter
MEANING
Note
Note
ANNOUNCEMENT EQUIPMENT NUMBER
(EQP) 122-125
ND-70348 (E)
DATA
33 Not Used
34 Automated Attendant (1st Announcement)
35 Automated Attendant (2nd Announcement)
36 Slumber Time - Do Not Disturb
(for Slumber Time Group 1)
37 Slumber Time - Do Not Disturb
(for Slumber Time Group 2)
38 Slumber Time - Do Not Disturb
(for Slumber Time Group 3)
39 Slumber Time - Do Not Disturb
(for Slumber Time Group 4)
40 Slumber Time - Do Not Disturb
(for Slumber Time Group 5)
41 Slumber Time - Do Not Disturb
(for Slumber Time Group 6)
42 Slumber Time - Do Not Disturb
(for Slumber Time Group 7)
43-48 Not Used
49-53 Delay Announcement Attendant (1st Announcement)
54-58 Delay Announcement Attendant (2nd Announcement)
59- Not Used
121
122- Multiple Announcement
125
126- Not Used
127
EQP
Assign the announcement equipment number with a
range from 122 to 125 (Multi announcement).
MEANING
CHAPTER 4
Page 238
Revision 3.0
ASPA