NEC NEAX 7400 IMX Command Manual page 271

3. Data Entry Instructions
OPR
Enter OPR assigned by the AFRS command.
Enter the trunk route seizure order.
TIME OF OUTGOING
DAY ROUTE
CHANGE SELECTION
PATTERN PATTERN
(TDPTN) NUMBER
0-7 (OPR)
0-4000
1
0
0
1
TDPTN
Enter data with a range from 0 to 7 if the Time Pattern
assignment is required by the ATCP command, or the
Clocked Manual Override data assigned by the ACMO
command. Different TDPTN data can be assigned to a
single OPR.
Enter data with a range from 1 to 999 if the digits addition is required by the AADC
command. Otherwise, enter 0. A maximum of 4 digits of DC can be added when the
PNL is assigned with a range from 1 to 127, and a maximum of 24 digits of DC can
be added when the PNL data with a range from 128 to 999.
RA
E
0=Route advance ends (Last route)
1= -
ORDER OF ROUTE OUTSIDE
ROUTE ADVANCING ROUTE
ADVANCING END NUMBER
(RA) INDICATION
0-7 (E)
0/1
1 0
0
0 0
1
PNL
Enter the external trunk route number which is seized in the RA.
The B-channel/voice channel route number should be entered
in the case of ISDN/CCIS interface.
Enter the number of digits to be
skipped from dialed numbers.
NUMBER PATTERN
OF NUMBER
SKIPPED LOCATION
(RT) DIGITS (PNL)
(SKIP) 0-999
0-24
0 1 0
1
2
2
0 1 0
1
0=Overflow Tone is not provided
1=Overflow Tone is provided
0=LCR-Controlled Alternate PRSC service is not required
1-15=The restriction class referred by the AEFR command.
ND-70348 (E)
RT
SKIP
OVERFLOW PRIORITY
TONE RESTRICTION
(OVFT) CLASS
0/1 (PRSC)
0-15
0 0
0 0
OVFT
PRSC
AOPR
REMARKS
0
0
CHAPTER 4
Page 266
Revision 3.0