NEC NEAX 7400 IMX Command Manual page 344

10. There is no default key data provided for D
must be programmed. When assigning the key data of the line/feature button, take the following precau-
tions:
(a) My Line Key must be assigned in KYN=1-8, and KYN=9-16 should be assigned KYI=0 (Not used).
(b) The following function keys are basically fixed:
FKY=13:CONF (Three-Way Calling)
FKY=18:TRANSFER (Call Transfer-All Calls)
FKY=20:HOLD (Non-Exclusive Hold/Exclusive Hold)
FKY=28:ANSWER
FKY=51:MIC
FKY=52:SPEAKER
FKY=57:RECALL
(c) Not used line/feature buttons should be assigned KYI=0 (Not used).
11. There is no default key data provided for D
line/feature buttons must be programmed. When assigning the key data of the line/feature button, take the
following precautions:
(a) My Line Key must be assigned in KYN=1-24, and KYN=25-40 should be assigned KYI=0 (Not used).
My Line in KYN=17-24 cannot be assigned without assigning any Line Key or any Function Key in
KYN=1-16.
(b) The following function keys are basically fixed.
FKY=13: CONF (Three-Way Calling)
FKY=18: TRANSFER (Call Transfer-All Calls)
FKY=20: HOLD (Non-Exclusive Hold/Exclusive Hold)
FKY=28: ANSWER
FKY=51: MIC
FKY=52: SPEAKER
FKY=57: RECALL
(c) Not used line/feature buttons should be assigned KYI=0 (Not used).
12. When using 16ELCJ (SP-3295, PROG-B or later) is used, the FKY=49: Speed Calling-One Touch can be
assigned to a Key Number (KYN) larger than 16.
Speed Calling-One Touch data can be saved by the BOSD command.
Note 1:
A maximum of 16 Key Numbers (KYNs) in the consecutive order can be programmed for Speed Call-
Note 2:
ing-One Touch key.
13. For Call Forwarding-Busy Line and Call Forwarding-Don't Answer, refer to ASYD SYS1 Index5 (sepa-
rate/common access for C.F.-Busy Line and C.F.-Don't Answer). If common access codes are assigned,
only one key is required to activate the features. If separate access codes are assigned, separate function
keys must be assigned.
term
(8-button type). The key data for all the line/feature buttons
term
(24-button type/32-button type). The key data for all of the
Note 1, Note 2
ND-70348 (E)
AKYD
CHAPTER 4
Page 339
Revision 3.0