Aldn: Assignment Of Listed Directory Number - NEC NEAX 7400 IMX Command Manual

ALDN: Assignment of Listed Directory Number

1. General
This command is used to assign the Listed Directory Number (LDN) which allows a Direct Inward Dialing
(DID) call to terminate to Attendant Consoles.
2. Precautions
1. When the LDN number assigned by this command is dialed from PSTN, the call terminates to Attendant
Consoles during the Day mode, and redirect to a station or outside party in the Night mode.
2. The numbering of the LDN assigned by this command must conform to the numbering plan data.
(The ANPD command and the ASPA command (SRV=STN))
3. The applicable tenant number (TN) range is designated by the ASYD command, SYS1, INDEX8. If data
of this command is common for all tenants (ASYD command, SYS1, INDEX92, bit3=1), assign TN pa-
rameter as data "1" for all tenants.
4. The number of station number (STN) digits are designated by the ASYD command, SYS1, INDEX16.
ND-70348 (E)
ALDN
CHAPTER 4
Page 282
Revision 3.0